Electronic Measuring | Dual Band 2.4G/5G Signal Usage Analyzer 2.4inch TFT Display Screen WiFi Analyzer

Description

Product Description
Specification:
Certification: NONE
Origin: Mainland China
Shell material: ABS
Size: approximately 130x90mm/5.11×3.54inch
Purpose:
In the same environment, there are too many WiFi signals, and multiple signals occupying the same frequency point can affect each other, resulting in poor WiFi signal quality. With this assistant, it is easy to check which frequency point has more signals and which frequency point is more idle. You can adjust your WiFi, switch frequency points to more empty frequency points, and improve the communication quality of your WiFi
usage method:
1. Long press the button to turn on the device, and long press again to turn it off
2. Press the button once to start scanning, and press the button again to pause scanning
3. The waveform on the screen displays the WiFi signals of all frequency points in the 2.4G frequency band. Originally, only the WiFi signal with the strongest signal was displayed. But if there are multiple signals at the same frequency point, they are displayed in numbers below the corresponding coordinate scale, such as the number 5, indicating that the same frequency point has 5 WiFi occupied. The waveform below the screen corresponds to the waveform of the 5G signal. The interpretation method is the same as above. Due to the fact that 5G signals have more frequency points, it is not possible to indicate all frequency points on the coordinate scale
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 X WIFI Signal Scanner
1 X Typec Charging Cable