Electrical Instruments | MS6818 LCD Cable Tester Wire Tracker Metal Pipe Locator Detector 12-400V

Description

Product Description
MS6818 Professional LCD Cable Tester Wire Tracker Metal Pipe Locator Detector Line Finder Tracer Checker Voltage 12-400V Diagnostic Tools
Feature:
Detect the laying paths of cables, electrical lines, water and gas pipelines buried in walls and underground;
Detect open and short-circuit faults in cables and electrical circuits buried in walls and underground;
Find the fuse and its fuse circuit;
Look for covered sockets and junction boxes;
Find the open circuit and short circuit faults in the electric heating line under the floor;
The transmitter has built-in AC and DC voltmeter function, which can linearly measure the AC and DC voltages of 12~400V: AC voltage: 12~400V (50~60Hz) ±2.5%, DC voltage: 12~400V±2.5%
The transmitter’s display screen can display the set transmit power level, transmit code, its own battery level, the measured external voltage value, whether the measured external voltage is AC or DC, and the external high-voltage flash warning symbol;
The transmitter has a self-check function, which can detect its own emission status and display it on the LCD screen for effective reference for users;
The receiver’s display screen can display the power level of the transmitter, the transmitted code, the battery level of the transmitter and its own battery level, the detected AC voltage induction signal and the flash warning symbol;
The receiver sensitivity can be adjusted automatically or manually;
The receiver has an automatic frequency sweep function;
Both receiver and transmitter have mute function;
Receiver automatic shutdown function (more than 10 minutes without key operation, it will automatically turn off the power);
The LCD screen of the receiver has a backlight function, which is convenient for application in poor light applications;
Both the receiver and transmitter are equipped with a flashlight function to detect cables in the dark;
Additional transmitters can be provided to expand or distinguish multiple signals;
The structure is compact, durable and easy to carry.
Other Function:
Transmitter’s voltmeter function: yes
Flashlight: yes
Backlight: yes
Ambient temperature display: yes
Mute: yes
Automatic shutdown: yes
Transmitter Specification:
Output signal: 125kHz
External voltage identification voltage range: DC 12-400V ±2.5%; AC12~400V (50~60Hz) ±2.5%
Temperature measurement technical index: ±2.5℃
Display: LCD, with function display and bar graph
External voltage dielectric strength: maximum 400VAC/DC
Overvoltage category: CATIII300V
Pollution degree: 2
Power supply: 1x9V,IEC 6LR61 (not included)
Power consumption: minimum current about 31mA; maximum current about 115mA
Fuse: F0.5A1000V, 6.3x32mm
Temperature range:
Working: -10℃ to 50℃, maximum relative humidity of 80% (non-condensing)
Storage: -20℃ to +60℃, maximum relative humidity of 80% (non-condensing)
Altitude: up to 2000m
Dimensions (height x width x depth): 190x89x42.5mm
Receiver Specification:
Tracking depth: The tracking depth depends on the medium and the specific application
Cable positioning mode: about 0 to 2m for single pole application; about 0 to 0.5m for double pole application; up to 2.5m for single loop
Grid voltage identification: about 0 to 0.4m
Display: LCD, with function display and bar graph
Power supply: 6×1.5VAAA.IEC LRO3 (not included)
Power consumption: The minimum current is about 32mA, the maximum current is about 89mA
Temperature range: Working: -10℃ to 50℃, maximum 80% relative humidity (non-condensing); Storage: -20℃ to +60℃, maximum 80% relative humidity (non-condensing).
Altitude: up to 2000m
Dimensions (height x width x depth): 24.5x78x38.5mm
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1*Ground Rod