Electric Soldering Irons | Cordless T12 Quick Heating Soldering Station 70W for WORX 20V Max Li-ion Battery

Description

Product Description
Specification:
Certification: CE
Origin: Mainland China
Power: Max 70W
Working voltage: 12-24V
MCU:32bit M1
Screen: 1.77 inches TFT
Color: As shown in the photo
Compatible: suitable for WORX 18/20V batteries
Advantages: Cordless and easy to carry.
Temperature unit: Celsius/Fahrenheit
Shell material: ABS
Product size: about 220.00×112.00×61.00mm (8.66×4.41×2.4inch)
Basic operations:
1: In normal mode, short press the encoder to enter the preset temperature mode (preset four groups of commonly used temperatures according to your own needs, and rotate the encoder to cycle through these four groups of preset temperatures), then short press again to enter the setting temperature mode. Each time you turn the encoder, the temperature will increase by 10 degrees, and the temperature is adjustable in steps!
2: In normal mode, long press the encoder to enter the setting menu, short press to select, then short press to cancel the selection, long press the encoder in the menu interface to exit and return to the previous level!
Important notes on the T12 welding station:
-If you enter the menu to change parameters or restore factory settings, please be sure to set the following parameters correctly, otherwise errors and other abnormalities will occur!
1. The sleep time must be set to "0", otherwise the sleep seat function will be invalid. (Time settings in the main menu – Sleep time – set to 0
2. Set the standby time to 10 (time setting in the main menu – standby time – set to 5 or 10, you can set any time length as needed)
3. Undervoltage protection is set to 15 or 16 (Other settings in the main menu – Voltage protection – set to 16)
4. Sleep temperature setting (Temperature setting in the main menu – Sleep temperature – set to 60)
5. Maximum temperature setting (Temperature setting in the main menu – Maximum temperature – 420)
6. If you use a T12 heating element, please select T12 as the heating element model (Main Menu – Other Settings – Nozzle Selection – T12)
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 X Soldering Iron Station (Battery Not Included)
1 X T12-K Handle With Heating Element