Other Tools | 3/4 Inch Water Pressure Regulator Brass Handle Water Pressure Reducer Adjustable

Description

Product Description
Specification:
Certification: NONE
Origin: Mainland China
Structure: Regulating
Model Number: Valves
Standard or Nonstandard: Standard
Media: Water
Is Smart Device: no
Material: Brass
Connector Thread Specification: 3/4"
Size: Approximately 100.00×90.00×30.00mm (3.94×3.54×1.18inch)
Instructions:
To increase pressure:
When increasing pressure, ensure that the inlet side is open and the outlet side is closed. Then, simply turn the top handwheel clockwise to increase the desired pressure.
To decrease pressure:
Close both the inlet and outlet sides.
Open the outlet side to release pressure immediately. Use the handwheel counterclockwise to lower the pressure to the minimum, then close the outlet side.
Open the inlet side, then turn the top handwheel clockwise to increase the pressure to the desired level.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 X Water Pressure Regulator
2 x Filters
2 x Hose Washers/Gaskets
1 x PTFE Tape