Analyzers | Timber Damp Detector Digital Handhold Hygrometer for Bamboo/Paper/Cardboard/Wall

Description

Product Description
Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: Woodworking
Display Type: DIGITAL
With Backlight Or Not: YES
Model Number: Wood Moisture Meter
Principle: Resistance type
Wood range: 4~75%
Paper range: 4-90%
Wall range: 0.2-24%
Resolution: 0.1%
Accuracy: ± 0.5%
Electrode length: 10mm (0.4inch)
Electrode needle: integrated
Automatic shutdown: After no operation of the button within 5 minutes
Power supply: 2 No. 7 batteries (not included)
Product material: ABS engineering plastic
Working temperature: 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
Measurement temperature range: -20 to 70 degrees Celsius
Product size: 144 x 64 x 31mm/5.66×2.51×1.22inch
Description:
This instrument can measure the moisture content of over 50 types of wood, suitable for various occasions to measure the moisture content of wood and the current environmental temperature. The instrument has four wood modes such as ABCD, allowing users to take accurate moisture measurements corresponding to various wood varieties
Function:
Low battery voltage indicator symbol
Lock screen function indication
Selected wood type indication
Current moisture measurement reading
Current temperature reading
Power On Key
Wood type selection key
C/F Celsius and Fahrenheit toggle keys
Lock screen key
Reference list of wood types:
A. Teak wood, walnut wood, white red bean tree, rubber tree, cork, mahogany, persimmon wood, alder wood, neem, Chinese toon, sour jujube, yellow pear, chicken wing wood, agarwood
B. Clone, poplar, beech, cedar, sassafras, catalpa, camphor, nanmu, maple, Soviet poplar, large leaved poplar, Populus euphratica
C. Liu’an, Manchurian ash, elm, fir, maple, sandalwood, oak, cherry, hemlock, cypress, Quercus, Manchurian ash,
D. Basswood, Larch, Birch, Korean Pine, Camphor Pine, Huashan Pine, Madai Pine, Masson Pine
Measurement steps:
1. Remove the battery cover, install two No. 7 dry batteries, and press the power button once to turn on the machine.
2. Remove the electrode needle cap and expose the electrode needle.
3. Press the "MODE" button to select the appropriate wood calibration scales A, B, C, and D (refer to the wood calibration table later in this guide) to measure the corresponding wood.
4. Insert the needle into the material and read the current displayed data. Press and hold the HOLD key once to lock the display reading.
5. Read the current ambient temperature. Press the C/F key to switch between Celsius and Fahrenheit degrees.
6. Press the power button once to turn off the instrument power
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Wood Moisture Meter
1 x Instructions